Products EP1501

EP1501 (Legacy Product)

Access Control Platform for Interfacing a Single Door Opening.
Talk to expert
EP1501
Benefits
  • Connects to a Windows or Linux host for increased programming flexibility.
  • Supports a range of wired and wireless reader technologies.
  • Securely scales from 1 to 17 doors/openings.
  • PoE enabled for full support of device and door peripherals.
Downloads
Product Images
FAQ

Frequently asked questions

Please refer to the linked document "Controllers Comparison Chart"

The battery on LP series controllers backs up SRAM and the RTC (Real Time Clock). Should a panel have a missing/dead battery and go through an extended power cycle, the onboard configuration will be lost and will require a complete download. Note, on the LP1501 the battery is a rechargeable battery which is only used to backup SRAM as that panel does not have a RTC.

Input circuits: minimum working/service voltage: 12 volts Output circuits (switching DC): minimum working/service voltage: 30 volts Reader data lines: minimum working/service voltage: 5 volts Reader power: minimum working/service voltage: as required by reader RS-232 communication: minimum working/service voltage: ±25 volts RS-485 communication: minimum working/service voltage: ±7 volts Ethernet (non PoE): minimum working/service voltage: 5 volts PoE: minimum working/service voltage: 60 volts

Mercury supports up to 128 floors.

The Mercury products provide both standard elevator control (using relays and inputs) as well as a higher level integration to elevator systems. The standard elevator offering comes in two forms:: - Type 1: Elevator control without floor select feedback (just using outputs connected to elevator system). - Type 2: Elevator control with floor select feedback (uses both outputs and inputs connected to elevator system). The higher level integrations that are currently available are the following: OTIS Compass KONE ThyssenKrupp Mitsubishi

On the EP series controller the minimum password length is 6 characters. The maximum password length is 10 characters. On the LP series controllers this has been changed to be between 8 - 64 characters.